This is the follow up post on the new Flame Boss 100. For its trial run, I figured go big or go home and nothing tops brisket! I had a 13 pound brisket all trimmed up. I rubbed it down with mustard and a mix of Fiesta Brisket Seasoning and Dizzy Pig Cow Lick. Normally, I just use a 50/50 mix of salt and freshly ground black pepper by weight for brisket, but after realizing just how many spices and rubs I have during our move, I thought it was time to clear some out. No more Fiesta. Started the Egg around 10:30 Friday night to allow plenty of time for the Egg to get dialed in with the new controller. I wasn’t sure how long it would take to get up to temp and didn’t want to mess up the finishing time on the brisket. Nothing worse than having a horde of starving masses at your house and you don’t want them filling up on chips and dips and such.
Played with the temps a bit between 10 and 12 and it did a really good job responding. Brisket went on at midnight with B&B oak lump and mesquite (both chips and chunks scattered in the lump) for smoke. Temp set at 235F. Went to bed around 1:30 and all looked good. Not sure what time I got up, but the Egg was steady at 236. 1 degree difference. I think I can live with that.
I’m pretty sure I pulled it at 1PM (13 hours or so) when the temp had hit around 200F in most places and the probe went in like “buttah”. Forgot to take a pic. Sorry, totally gotten out of the habit of writing posts and documenting the cook with pictures. The brisket was wrapped in foil and placed in a cooler (FTC or foil, towel, cooler) to rest for a few hours as it wasn’t time to eat just then. Then it was time to bump the temp to 250F the ABTs on.
Yes, there were 3 nekid, vegan ones for my cousin. How a Griffin became a vegetarian? I blame it on living in California for a few years. 😕
The brisket was so tender after sitting in a cooler for a few hours. I was able to separate the point and the flat with the back of a knife. Here’s the flat. For some reason I can never get a smoke ring on a brisket on the Egg. Not that effects taste, just cosmetic.
Some people really like the flat or the “lean” portion of the brisket. Not me.
I could cook a whole brisket, toss the flat and just eat the point or “fatty” portion of the brisket and be totally happy. A little bend test. Fork tender.
After pulling the ABTs, I raised the temp from 250 to 375 so my cousin could cook his vegan patties. The Flame Boss had no trouble bringing it up to temp in less than 15 minutes. No pictures of that cuz well they were frozen vegan patties. Who cares?
So what are my thoughts? I did notice when installing the Flame Boss, that the new fan does not have those two bendy wires that attach it to the adapter. Kinda freaked me out finding that at first after having a few drinks. I thought mine must have been defective. Turns out it has a new lip design that keeps it attached. Forgot to take pics of that.
Do you need a pit controller to take care of your Egg? Absolutely not. Is it nice not having to worry about the possibility of your fire going out overnight? You betcha!! Is it nice to just light you egg, plug it in, walk away and know that it will hit your desired temp and not overshoot while you’re prepping your meal? Or watching tv? Or having a cold beverage? You’re darn tooting!
As far as performance, I’m totally happy. Works like a champ. Besides the way it attaches, the new design of the controller itself (the most obvious change and appears to be just cosmetic) and new wires that I have no info on, it works just like the original…perfect IMHO. Quickly brought the egg up to temp, held it there for over 13 hours then quickly brought it up to a higher temp to direct grill some burgers. The “Open Dome” function works just as it should, stopping the fan from coming on when you are checking your meat.
No it doesn’t have internet or wi-fi. No it won’t keep track of your temps and graph them. No it won’t tie your shoes or open your beer, but then again I don’t want or need a pit controller that does all those things. If you do, hey, that’s your thing and this one isn’t for you. No biggie. Different strokes and all. Actually, if it could open my beer…
If you want a controller that just controls your pit and that’s all without all the fancy bells and whistles, this one deserves looking at. Obviously, I’ve only used it once, but I’ll keep testing it to see how it does over time and how durable it is. So far, I am pleased with it. In fact, I’d love to try it out again this coming weekend but I’ve already got plans on Saturday. Maybe there will be some time for ribs on Sunday…
**Edit – since I wrote this, I was asked on the Egghead Forum by a fellow named BRushOO “Here’s the bottom line of the Flame Boss 100 as I see it: If this flame boss was stolen/broke/you were no longer it’s owner….. would you buy another one at retail cost?” I thought about it and quite honestly I would say that yes, I would. I would not hesitate to buy one. Unless, I opted to check out the DigiQ just for sake of change and in order to do review a different brand.